
www.meas-
Measurement Specialties Inc. NetScanner System (9016, 9021, & 9022) User’s Manual
3 - 63
Transducer Coefficient Description
Temperature 6, Pressures 1-5 voltages
reserved for future use (temperature 7)
Temperature 1 Temperature Output voltage at 0 psi
Temperature 2 Temperature Output voltage at 0 psi
Temperature 3 Temperature Output voltage at 0 psi
Temperature 4 Temperature Output voltage at 0 psi
Temperature 5 Temperature Output voltage at 0 psi
Temperature 6 Temperature Output voltage at 0 psi
(reserved) Temperature 7 Temperature Output voltage at 0 psi
Temp Vs Pressure Correction coefficient (t0)
Temp Vs Pressure Correction coefficient (t1)
Temp Vs Pressure Correction coefficient (t2)
38
Temp Vs Pressure Correction coefficient (t3)
FLOAT
4D
Pressure Voltage Gain Index
Integer
4E
Temperature Voltage Gain Index
Integer
5F
Current Calculated Pressure (PSI)
FLOAT
The User Defined Date field (cc=07) is also a 32-bit integer which may be
encoded in a similar manner. Possible uses are to indicate the date of last user
zero and/or span calibration or possibly the date of next required calibration. If
this optional field is used, the user is responsible for correctly encoding the date
into the appropriate 32-bit integer value. Any modifications of this field (using
the Download Internal Coefficients (‘v’) command) will result in the new value
automatically being entered to transducer non-volatile memory.
The Date of Factory Calibration field (cc=08) identifies the date of factory
calibration for the DH200 transducer (9016) or 9400 transducer (9021/9022. It is
stored internally as a 32-bit integer whose value (viewed as a decimal number) is in
the format of yymmdd (year, month, day).
Comentários a estes Manuais